86-371-67858720
No. 8 Hongye Road, High-Tech Development Zone, Zhengzhou, Henan, China
Big Capacity Three Channel Drum Dryer For Wet Sand From China Factory
three channel drum dryer Processed Materials:River sand, artificial sand, silica sand, yellow sand, mineral sand, mineral powder, slag, coal ash, coal slag, etc.
Application: Dry-mixed mortar industry, cement, building materials, glass, foundry industry, chemical industry, etc.
Capacity:1-50tones per hour
Heating Fuel:Coal, Gas, Oil, Biomass fuels, Wood,etc
Based on single pass drum dryer, Hengxing equipment also develop triple pass drum dryer to take drum drying technology a step further.3 pass rotary dryer improves the performance in operation cost, service life, energy efficiency, product consistency.
three channel drum dryer has proved its application in building materials, chemical, foundry, cement industry. It is used in the dehydration of dry mixed mortar, silica sand, foundry sand, iron powder, coal gangue, blast furnace slag, fine clay, etc. Final moisture content could be reduced to 0.5-1%. Optimal feeding particles should be below 30mm.
As three passes are concentric and interlocked, full-length drums maximize the effective length and residence time in a much smaller floor area compared with single pass dryer. Instead of gear driving or chain driving, triple pass drum dryer is driven by the rollers. Smooth transmission reduces abrasion and extends service life.
Advantages of three channel drum dryer :
Higher thermal efficiency. External drum is also a layer of heat preservation. Single pass dryer has a greater surface area exposed to the atmosphere, lots of heat is wasted by radiation.
Heat transfer happens in the form of convection, conduction, radiation.
Shortened length, smaller floor area.
Compacted structure, manufactured as single unit, shipped in fully assembly.
Final moisture content could be as low as 0.5-1%. Suitable for cement plant, slag fines, mortar production line.
More consistent end products. Less under or over drying phenomenon.
Temperature inside external pass is only 60°C, temperature at the outlet is below 100°C. Low temperature does less damage to the bag house.
three channel drum dryer working process:
Materials enter the inner side of the drum through the feeding device to realize current flow drying process, then the materials enter the middle layer of the inner wall through the other end to realize counter current drying process. They are lifted in over and over in the middle layer which advance in two-steps forward and one-step back way. The three-drum dryers absorb heat from both inner drum and middle drum, which extend the drying time and realize the best drying condition. Finally, materials fall into the external layer of the drum from the other end of the middle layer, processing in a rectangle multi-loop way. The dried materials move quickly out of the drum under the hot air, while the wet ones remain because of their own weight. Materials are dried completely inside the rectangle shoveling plate and then cooled by the single drum cooler, thus finishing the whole drying process.
three channel drum dryer main technical specification:
| Specification | φ 2.0× 6m | φ 2.5× 6.5m | φ 2.7× 7m | φ 3× 7m | φ 3.2× 7m | φ 3.6× 8m | φ 4.2× 8.5m | |
| Diameter(m) | 2.0 | 2.5 | 2.7 | 3 | 3.2 | 3.6 | 4.2 | |
| Length(m) | 6 | 6.5 | 7 | 7 | 7 | 8 | 8.5 | |
| Shell volume (m3) | 18.84 | 31.89 | 40.5 | 49.46 | 56.26 | 81.38 | 118 | |
| Shell rotary speed(rpm) | 3-10 | 3-10 | 3-10 | 3-10 | 3-10 | 3-10 | 3-10 | |
| Material stay time (min) | 12-30 | 12-30 | 12-30 | 12-30 | 12-30 | 12-30 | 12-30 | |
| Material moisture (%) | 6-25 | 6-25 | 6-25 | 6-25 | 6-25 | 6-25 | 6-25 | |
| Mafter moisture after drying(%) | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | |
| Max inlet temperature | 750-900 | 750-900 | 750-900 | 750-900 | 750-900 | 750-900 | 750-900 | |
| Production capacity (T/H) | Ore slag | 20-25 | 25-30 | 30-35 | 35-10 | 40-45 | 50-65 | 70-85 |
| Flyash | 10-17 | 17-21 | 20-25 | 23-27 | 25-30 | 30-45 | 45-63 | |
| Sand | 20-27 | 25-40 | 27-45 | 30-45 | 35-50 | 55-75 | 75-99 | |
| Motor model | Yr160m-4 | Yr132m-4E | Yr160m-4 | Yr160m-4 | Yr132m-5E | Yr160m-4E | Yr160m-4E | |
| Motor power (kw) | 7.5× 2 | 11× 2 | 7.5× 4 | 7.5× 4 | 11× 4 | 15× 4 | 18.5× 4 | |
Hengxing three channel drum dryer user site :
3 pass rotary dryer shipping :
About Installation and Commissioning
we are able to guide the overall installation of whole set rotary dryer production line, including stone crushing production line and ball mill production line,rotary dryer production line, etc., which will allow you to start the normal operation of equipment immediately and successfully.
Zhengzhou Hengxing Heavy Equipment Co.,Ltd is a joint stock corporation integrating with research, manufacture and sale which targeted at the large and medium sized series of heavy equipments. Our main products are stone crushing machines, sand making machine ,ball mill machine ,mineral ore dressing machines,rotary dryer,rotary kiln, AAC block making machine,coal briquetting machine,which were widely used in mineral processing and construction industry.Our company is located at the National High-Tech Development Zone in Zhengzhou city, Henan province. Since the establishment of our company, a passel of scientific elites has been gathered with our modernized management system and accurate product positioning. Our company has set up the computer information-based management with production, CAD and CAPP on production research and processing design. Besides, our company has been equipped with powerful machines and equipments for machining, forging, rivet welding, carburization heat processing. With the long term cooperative relationship to the research institutes at home and abroad, we have introduced advanced technology, processing and detecting equipment for the development of the new products and promotion of our workmanship.
Pre-sale service
· Process designing
· Freely provide project designing
· Choosing suitable equipment for you
Medium-sales service
· Complete process of export
· Draft the construction scheme and detailed process
· Accompany you to complete the acceptance of the equipment
After-sales service
· Good and fast arrangement for the shipment
· We sent engineer to the scene to guide installation debugging and training operators
1.what is the raw material to be dried?
2.what is the input moisture ?
3.what is the output moisture ?
4.what is the production capacity per hour ?
Sara
Mobile phone : (whatsapp number): 0086137 8347 1727
Skype: sarapang6
Wechat: sarapang6
Company Website: www.chinamineline.com
Email: sales006*zzhxmachine.com
